Why is Oura Ring Not Charging? How to fix Oura Ring Charging Issues?

Do you own a popular smart ring & often found your Oura Ring Not Charging? You’re not alone. Many people have reported their Oura ring not charging properly, and it can be incredibly frustrating. Don’t despair, though. There are a few things that could be causing this issue, and in this article, we’ll explore four of the most common reasons for an Oura Ring not charging as well as tips on how to prevent it from happening again. Get ready to get your ring back in action!

Oura Ring Not Charging!

In this day and age, a wearable device like the Oura Ring is becoming increasingly popular. But what happens when your ring stops charging or won’t hold its charge? This can be incredibly frustrating, but luckily there are a few common reasons why this might be happening.

The first reason could be that the battery has simply degraded over time. All rechargeable batteries have limited life cycles, and after a certain amount of use, they need to be replaced. Another possible cause is that the battery percentage isn’t high enough for it to charge properly. To fix this, you can manually check the current battery level in the settings menu on your phone and then plug in your ring accordingly.

Thirdly, if you’re using an Apple Watch in conjunction with your ring, it could be causing interference with its charging capabilities due to their close proximity to each other. In this case, try moving your watch away from the ring when charging them both at the same time.

Lastly, if you use your Oura Ring regularly and find that it’s not holding its charge over time, it may need a reset every now and then. To do so, just press down on the middle finger of the ring until it vibrates three times and then plug it into its power brick again to reset it.

By following these steps you should be able to get your Oura Ring up and running again in no time!

Reasons Your Oura Ring Is Not Charging

Oura Rings are state-of-the-art fitness trackers that can monitor your heart rate, sleep stages, activity levels and more. But if you find your ring isn’t charging properly, there could be a few reasons for this.

Battery may have degraded over time due to regular use – Reason #1 for Oura Ring Not Charging

Firstly, the battery may have degraded over time due to regular use. To fix this, you’ll need to replace the battery or manually check the current battery level in the settings menu on your phone and then plug in your ring accordingly.

Using an Apple Watch at the same time as your Oura Ring – Reason #2 for Oura Ring Not Charging

Secondly, if you’re using an Apple Watch at the same time as your Oura Ring they could be interfering with each other’s charging due to their close proximity. The solution here is to move them away from each other when charging them both at the same time.

Excessive use of your ring – Reason #3 for Oura Ring Not Charging

Thirdly, excessive use of your ring can lead to it not holding its charge over time. To fix this you can reset it by pressing down on the middle finger of the ring until it vibrates three times and then plugging it back into its power brick again.

Make sure that all ports are clean and clear – Reason #4 for Oura Ring Not Charging

Finally, make sure that all ports are clean and clear of any debris which might block or hinder proper charging capabilities on either device. By following these steps you should get your Oura Ring up and running again quickly!

By following these steps you can ensure that your Oura Ring is up and running again in no time. But be sure to check the fit of your ring in the dock too – if it’s not fitted correctly, it won’t charge properly! Find out what to do next about this issue in our upcoming section.

The ring is not fitted correctly to the dock  – Reason #5 for Oura Ring Not Charging

If your Oura Ring isn’t charging properly, the first thing to check is whether it’s fitted correctly in its dock. It needs to be seated securely in order for the charger to make the connection and charge the battery. If you find that it’s not fitted properly, take it out and put it back in again.

Make sure that the contact points are lined up perfectly with those on the dock before pushing down lightly on top of them so that they click into place. You’ll know when this happens as a tiny indicator light will turn on at the front of the charger. If this hasn’t fixed your issue then try some of our other solutions listed above!

The charger could be faulty – Reason #6 for Oura Ring Not Charging

If the white LED light doesn’t turn on when you plug in the Oura Ring charger, then the charger is likely to be faulty and needs replacing. This could be due to a number of things, such as battery degradation or it simply being worn out over time. If you suspect that this is the case, you can purchase a new charger from our website.

It’s important to note that if your battery is completely drained and won’t charge at all, this could be an issue with your device itself. In this case we recommend reaching out to our customer support team for assistance. They will help you to determine whether there is a problem with your device or your charger and advise on what steps need to be taken next.

The issue could be with the power supply – Reason #7 for Oura Ring Not Charging

When your Oura Ring won’t charge, it could be due to an issue with the power supply. Your device needs a specific type of power supply in order to charge correctly and if it is not used then you may experience issues such as slow charging or even no charging at all. To ensure that your Oura Ring charges efficiently, you should use the IEC 62368-1-compliant external 5Vdc supply that comes with the USB power cord.

It is important that you check the wattage rating of your power supply from time to time, as it should be no more than 15W after three seconds. If you are still having trouble charging your Oura Ring after checking these things, then please contact our customer support team for further assistance.

Defective ring – Reason #8 for Oura Ring Not Charging

If your Oura Ring still won’t charge after checking the power supply, then it may be an issue with the device itself. A defective ring will not be able to keep a charge and may need to be replaced. This can be determined by its battery level – if it’s lower than 10%, then you should replace it immediately.

For earlier generations of rings, you can place them on the charging pad and see how long it takes for them to reach full capacity. If it takes longer than usual or doesn’t reach full capacity at all, then your ring is likely defective and needs to be replaced.

How to Properly Charge Your Oura Ring to Prevent It from Deteriorating?

Properly charging your Oura Ring is essential to maintain its battery life and prevent it from deteriorating. To ensure the ring is adequately charged, make sure you use the power brick and USB cable that come with the device. Connect these components to a power outlet or a desktop before placing your ring on the charging station. When it’s docked, its LED light will flash until it’s fully charged. The time taken for this to happen can vary from 20 minutes to 80 minutes depending on the battery condition.

It’s also important to check the current battery level of your ring from time to time, which can be done by tapping it in the Home tab’s upper-right corner of your app. If it’s lower than 10%, then replace your ring immediately as this indicates a defective product. By following these simple steps, you can keep your Oura Ring in top condition and enjoy its benefits for longer!

Taking proper care of your Oura Ring is a great way to ensure it will last for years to come. With just a few simple steps, you can keep it in top condition and enjoy its benefits. Now that you know how to charge your ring, stay tuned as we’ll be discussing how to make sure your battery remains at 40% charge!

Ensure your battery remains at 40% charge

It is important to maintain the battery level of your Oura Ring above 40% to ensure optimal performance and longevity. To do this, make sure you charge it regularly and don’t let it run down below 10%. This can be easily done by connecting the charging cable to a power outlet or a computer and placing the ring on its charging station.

You can monitor the battery percentage in the Home tab of your app’s upper-right corner. If it drops below 10%, you should replace your ring immediately as this indicates a defective product.

Additionally, try not to leave your Oura Ring plugged into the charger for too long as this may damage the battery or cause it to overheat. With proper care and regular maintenance, you can keep your Oura Ring functioning at peak performance for many years!

Set Low Battery Reminders On

Setting a low battery reminder on your Oura Ring can help ensure that you never miss a charge and keep your device running optimally. To set a reminder, go to your app’s settings menu and select ‘Low Battery Alert’. This will allow you to customize the alert frequency (daily, weekly or monthly) and time of day when you would like to be alerted.

Once enabled, you will receive notifications when the current battery level drops below 40%. Having Low Battery Alert enabled will prevent your battery from dying at an inconvenient time, allowing you to keep track of your daily activities and activity scores from time to time.

Additionally, it can also help slow down the process of battery degradation as regular recharging helps maintain optimal performance for longer.

Charge Your Oura ring Before Sleeping

When wearing an Oura Ring, it is important that you remember to charge your ring before going to bed. This is because the third-generation Oura Ring is equipped with a rechargeable battery, and if the battery is not charged before sleeping, data regarding your heart rate variability, sleep score, sleep stages and other metrics may be lost.

To ensure that your Oura Ring has enough battery life to record all of your data throughout the night, make sure you check the battery percentage when getting ready for bed. If the charge is under 25%, it would be best to put the ring on the charger for at least 30 minutes so that it can record all of your data during sleep.

Having a full charge will also help maintain optimal performance from your device in between recharges.

Take A Break From Using The Device

It is important to remember to give your Oura Ring a break from time to time. This can help prevent battery degradation, as well as ensure that your data is accurate and reliable. To give your device a break, take off the ring for at least 10 minutes every few days or so.

During this time, you should also make sure that the battery level is checked and topped up if needed. This can be done by connecting it to a power brick or charging stand using the supplied cable.

Taking breaks from using your Oura Ring will help keep its current battery level high and allow it to track all of your daily activities accurately. Additionally, taking breaks can also improve sleep staging, respiratory rate monitoring and activity scores over time.

How To Prevent Your Battery From Spoiling?

Preventing your Oura Ring battery from spoiling is important to ensure that you are able to track all of your daily activities accurately. To do this, make sure to avoid leaving it on the charger for extended periods of time and keep the battery level topped up if needed.

Additionally, take off the ring for at least 10 minutes every few days or so and use rechargeable batteries when possible. This can help minimize battery degradation and improve sleep staging, respiratory rate monitoring and activity scores over time.

Furthermore, try to avoid letting the battery drain to zero as this can reduce its durability. By following these simple steps you can ensure that your Oura Ring is always ready to go and helping you monitor your health in the most accurate way possible.

By taking the time to properly care for your Oura Ring battery, you can ensure that you get the most accurate tracking of your daily activities and sleep patterns. And now that you know how to keep it in tip-top shape, why not learn about how to use your Oura Charger for even more convenience?

How to Use Your Oura Charger – Oura Help

The Oura Charger is the perfect way to keep your Oura Ring battery charged and ready to go. This small, yet powerful charger that comes with your ring is designed to easily fit on any middle finger to provide quick charging times and reliable power.

It’s also compatible with third-generation Oura Rings and above, as well as Apple Watches. To use your charger simply plug it into a USB port or power brick, insert your ring and press the button on the side of the charger. The LED color will indicate when it’s charging and once the lights turn green, you’ll know it’s fully charged and ready for use.

For more convenience, you can also purchase a replacement charger from our online store so you can charge one while using the other. As always, make sure to check your battery percentage from time to time in order to ensure that it stays at a healthy level; this helps preserve its longevity.

So don’t forget: with the Oura Charger, you can easily keep track of your current battery level and make sure that your ring is always ready for whatever activities come your way!

The Oura Charger provides a convenient and reliable way to keep your Oura Ring fully charged and ready for action. And if you’re wondering what else comes with the charger, stay tuned to find out!

What’s Included with Your Charger?

When you purchase an Oura Ring, you get more than just the wearable device. The charger that comes with your ring is a must-have accessory that not only helps keep your battery life at optimal levels, but also provides a convenient and reliable way to charge up quickly.

The USB charging power cord is compliant with IEC 62368-1 standard, and the power available to the equipment should not exceed 15W after three seconds. It’s also compatible with third-generation Oura Rings and above, as well as Apple Watches. The Gen3 charger includes a red-green-blue (RGB) LED to help communicate its charging status to the user.

In addition, a replacement charger can be purchased from our online store if needed for even greater convenience. With this fast and easy charging system in place, you can make sure that your Oura Ring is always ready when it’s time for sleep tracking or other daily activities!

How to Charge Your Oura Ring

Charging up your Oura Ring is quick and easy. To get started, you’ll need the USB charging power cord that comes with your ring, as well as a compatible power source such as a USB wall plug, laptop, or power brick. Connect the USB cable to the charging dock and plug in the other end into the power source. Then, place your ring on the charging dock and wait for it to charge. The LED will pulse white while it’s charging.

It typically takes 20-80 minutes for your Oura Ring to be fully charged, depending on its current battery level. You can check this by tapping the battery icon in the upper right-hand corner of the Home tab. If you ever need a replacement charger, you can purchase one from our online store at any time. With this fast and convenient system in place, you can always make sure that your Oura Ring has enough juice for sleep tracking or other daily activities!

LED Color Reference (Gen3 Chargers Only)

When you’re charging your Oura Ring, the color of the LED on your charger can tell you a lot. For the third-generation Oura Ring and charger, here’s what it means when you see each of these colors:

White – Your ring is charging successfully and is at least 30% full.

Blue – The charger is turned on, but not receiving power. Check to make sure that your power source is plugged in securely.

Red – There may be an issue with your ring, such as a disconnected battery or damaged plastic. Contact our customer service team for further assistance if this happens.

Green – This means that your ring has been charged to 100%, and can now be used for all its tracking and monitoring functions!

By recognizing these colors, you’ll know exactly when it’s time to top up your device’s battery so that it’s always ready to go when you are.

How to Purchase a Replacement Charger

If you need to purchase a replacement charger for your Oura Ring, the process is easy and straightforward. You can buy a new charger directly from our website and have it shipped to you. All chargers are size-specific and intended to be used with the ring it was shipped with.

To find your ring size, look at the inner band of your Oura Ring next to the QR code or tap on the battery icon in the upper right-hand corner of the Home tab in your Oura App.

Once you know your ring size, head over to our website, select the correct size charger, add it to your cart, and place your order. Your new charger will arrive shortly so that you can get back to tracking all of your daily activities with ease!

Things to Keep in Mind

When it comes to the Oura Ring, there are a few things to keep in mind. First, it’s important that your ring be charged to at least 30% before going to bed each night. This will ensure that you get accurate sleep insights and scores.

If your battery level is too low prior to bed, you won’t receive a Sleep or Readiness Score and no breakdown of your sleep stages. It may also be necessary for you to purchase a replacement charger for your Oura Ring from time-to-time.

All chargers are size-specific and intended to be used with the ring it was shipped with, so make sure you know your ring size before ordering a new one. Additionally, rechargeable batteries can degrade over time which means the battery percentage will decrease even when the device isn’t being used. Keep an eye on your current battery level so you can replace it when needed.

Getting an accurate and in-depth sleep score is essential to understanding your health, so make sure you keep your Oura Ring charged and ready for each night. For help troubleshooting any charging issues, stay tuned for our next section on Troubleshoot Charging Issues – Oura Help!

Troubleshoot Charging Issues – Oura Help

Troubleshooting charging issues with your Oura Ring can be a daunting task. Fortunately, there are some simple fixes that may help you get back to tracking your sleep and activity in no time. First, make sure the charger is properly connected to the power source and that it is securely attached to your ring.

If this doesn’t fix the problem, try cleaning off both the charger and the ring with a soft cloth. Additionally, check if a different power source (such as an alternate wall outlet) will charge successfully. Finally, verify that your ring isn’t too hot or cold as extreme temperatures can impact battery life.

If none of these solutions solve your issue, please contact our customer service team for further assistance. They can provide personalized troubleshooting tips tailored specifically to your situation and walk you through resolving any charging problems you may have with your Oura Ring.

We hope these tips have helped you get your Oura Ring back on track. If you’re still having issues, don’t hesitate to contact our customer service team for more personalized guidance. Now that your ring is charging again, it’s time to learn about the initial troubleshooting steps to take if your ring isn’t working properly!

Initial Troubleshooting Steps

If you find that your Oura Ring isn’t working properly, there are a few initial troubleshooting steps you can take to try and resolve the issue.

First, make sure that your battery level is above 30%. If it isn’t, charge your ring for at least 20 minutes before trying to use it again.

Next, check if any of the sensors on the ring are dirty or blocked in any way. Clean them off with a soft cloth if needed.

Charger or Ring Issue?

If your Oura Ring isn’t charging, there may be an issue with either the charger or the ring itself. To determine which one is causing the problem, you’ll need to start by doing some troubleshooting.

First, make sure that your charger is connected to a power source and plugged into the ring correctly. If it’s still not working, then try using a different charger or USB port. Additionally, make sure that your ring isn’t too hot or cold; if it is, allow it to come back to room temperature before attempting to charge it again.

If none of these steps work, then there might be an issue with the Oura Ring itself. In this case, try resetting the ring by pressing and holding down both buttons for 10 seconds until you feel a vibration—this should reset it and erase any stored data. Once complete, try charging it again with a known-working charger and USB port.

If you’re still having trouble getting your Oura Ring to charge after trying these troubleshooting steps, contact Oura support for further assistance.

We hope these troubleshooting steps were helpful in getting your Oura Ring up and running again. Be sure to check out our Gen3 Chargers, the next generation of power for your ring—they’re designed to maximize charging efficiency and reliability.

Gen3 Chargers

Oura’s Gen3 Chargers are the next generation of Oura Ring power. They’re designed to maximize charging speed and reliability, so you never have to worry about your ring running out of juice again.

They feature a self-test function that makes it easy to troubleshoot any potential charging issues. Just plug the charger into the power source without putting the ring on it, and the white charger LED should light up once and then fade away. If it doesn’t illuminate, this likely indicates that the charger itself is defective.

The chargers also include a red-green-blue (RGB) LED to help indicate their charging status, so you can easily keep track of when your ring is fully charged. And with their sleek design, they look great in any setting—so you can show off your tech style wherever you go!

Gen2 Chargers

For those with Gen2 Oura Ring Chargers, you can perform a simple home charger test to help troubleshoot any potential charging issues. Start by plugging your charger cable into a power source, then place the metal end of a separate USB cable in front of where the ring usually sits, above the light.

Make sure that the metal portion of the USB cable is pushed up against the center of your charger, and if it’s not touching, the light source will likely not be triggered on. If you’re still unable to get your charger light to turn on, try placing your ring on the charger one last time.

Gen2 chargers are designed for fast and reliable charging so you don’t have to worry about running out of juice. They feature a white LED that illuminates once and then fades away when plugged in without putting the ring on it—indicating that it’s working properly.

If this doesn’t happen, then it’s likely that there’s an issue with your charger itself. Additionally, they have an RGB LED to indicate their charging status so you know exactly when your Oura Ring is fully charged. Gen2 chargers are sleek and stylish so they’ll look great no matter where you go!

Oura Ring Charging (How to Charge & Charging Time)

Charging the Oura Ring is a simple process that only takes a few minutes. To charge, plug the charger into any USB power source and place the ring on the charger. The light on the charger will turn solid white to indicate that it’s charging correctly. Depending on how much battery life you have left, it should take anywhere from two to four hours for your Oura Ring to fully charge. Once it’s done, the light will turn green and you can remove your ring from the charger and get back to tracking your daily activities.

It’s important to keep in mind that Gen2 chargers are designed for optimal charging speed so if you’re using an older version of the Oura Ring, you may want to consider upgrading your charger for faster charging times. Additionally, make sure not to leave your Oura Ring on the charger overnight or longer than necessary as this can cause damage over time. Finally, be sure to store your Oura Ring and its accessories properly when not in use as this will help prolong its lifespan.

Charging your Oura Ring is easy and takes only a few minutes, so you can get back to tracking your activities quickly! But how much time does it actually take for the ring to fully charge? Stay tuned to find out more.

How Much time does it take to Charge Oura Ring?

The Oura Ring (Gen 3) takes between 20 to 80 minutes to charge fully, depending on the starting battery level. Factors such as the battery’s lifespan and environmental conditions can also affect the charging time of the Oura Ring. However, if your ring takes several hours to top up, it must be a faulty unit and you should request a replacement for it via the Oura Help website.

For optimal charging speed, we recommend using Gen2 chargers when possible. Additionally, don’t leave your Oura Ring on the charger overnight or longer than necessary as this can cause damage over time. Finally, make sure to store your ring and its accessories properly when not in use as this will help prolong its lifespan.

In short, charging your Oura Ring is easy and quick – you’ll be able to get back to tracking your activities in no time! With a Gen2 charger and optimal conditions, you can expect most rings to charge within 20-80 minutes depending on their battery levels.

How to Charge Oura Ring?

Charging your Oura Ring is simple and can be done in a few easy steps. Begin by connecting the supplied USB Type-C cord to the Oura Ring charging dock and plugging the other end of the cable into a USB power brick or wall plug. Next, place your Oura Ring on the wireless charging dock. The external USB power source must provide a clean 5V DC supply and comply with the IEC 62368-1 standard for optimal charging speed.

The Oura Ring (Gen 3) takes between 20 – 80 minutes to charge fully, depending on its battery level. However, if it takes longer than necessary, you should consider requesting a replacement via the Oura Help website. Additionally, make sure not to leave your ring on the charger overnight as this can cause damage over time. When not in use, store your ring and its accessories properly to help prolong its lifespan.

In conclusion, charging your Oura Ring is an easy task that can be completed in just a few minutes! With optimal conditions and Gen2 chargers, you’ll be able to get back to tracking your activities in no time at all!

Troubleshoot Oura Ring Charging Problems

If your Oura Ring is not charging properly, there are a few troubleshooting tips you can try to get it working again. First, check the LED light on the charging dock to make sure it is lit up. If it’s not, unplug the USB cable, turn the Type-C jack 180 degrees and reinsert it into the charger firmly. If the red LED light is blinking, take your Oura Ring on and off the charger a few times to ensure proper contact between them.

Make sure that your Oura Ring has the latest firmware version installed. Check for an update notification at the top of your Home tab in the Oura mobile app.

If none of these solutions work, try using a different power source or USB cable for charging. Also consider requesting a replacement from Oura Help if necessary. Lastly, remember not to leave your Oura Ring on its charger overnight as this can cause damage over time and store its accessories properly when not in use.

Lastly, verify that your ring is connected to both the Oura app and Bluetooth-enabled device. If all else fails and these initial steps don’t fix the problem, please contact our customer service team for further assistance. They can provide personalized troubleshooting tips tailored specifically to your situation and walk you through resolving any problems you may have with your Oura Ring.

We hope that these initial troubleshooting steps can help you get your Oura Ring up and running again. If not, our customer service team is here to provide personalized assistance in order to get your ring back in perfect condition. Stay tuned for the next section where we’ll discuss how to troubleshoot charger or ring issues!

Thanks for Reading :-)

Enjoyed this post? Share it with your friends.